Els preus definitius son els següents:

Modem MD3200 (X100P Clone)......... 25€ + IVA
VoIP Phone AT-320EE................ 58€ + IVA
VoIp Phone AT-320ED................ 61,35€ + IVA
Gateway AG-168VE................... 57,16€ + IVA

* Quan aneu a recollir el material a SETUP Informàtica podeu demanar la documentació
per comprovar el transport, les aduanes, etc...

Adjunto informació per a l'actualització del hardware aconseguint així, noves funcionalitats:

After you receive the AT-320 phones, please use the palmtool or internet explorer to upgrage the phone's firmware to 1.46 (the latest version) . If you don't upgrade the firmware, you will not have the chance of using IAX2 protocol. You can always get the latest firmware from this here: [weblink:http://www.aredfox.com/edownloads.htm] . Please remember that our phones is PA168S. And be sure do not use the incorrect firmware please. The 1.46 version of firmware has added some nice features, such as MWI for IAX2.

As to AG-168VE, please use the palmtool or internet explorer to upgrage the phone's firmware to 1.46 too . If you don't upgrade the firmware, you will not have the chance of using IAX2 protocol, and what's important is that, the lower version of the firmware for AG-168 can't work with DTMF. You can always get the latest firmware from here: [weblink:http://www.aredfox.com/edownloads.htm] . Please remember that AG-168VE's firmware name is PA168V. There are so many firmwares on that webpage, so be sure do not use the incorrect firmware please. There are references about how to configure PA168 devices: [weblink:http://www.aredfox.com/esetup.htm]

As to the X100p clone card, it is 100% compatible with Digium's X100P card, it does not need any extra driver except Zaptel. if you plug it to your pc's PCI slot, it will be detected automatically by the (redhat) linux. Your linux box will detect the X100P clone card as " Tiger Jet Network Inc. | Intel 537 ". You can do the " modprobe zaptel; modprobe wcfxo" to install it. After you can find it with zttool, try to configure the zapata.conf and run the Asterisk, if the Asterisk could run with the chan_zap.so , then it is ok.

Jordi Soler
S.E.T.U.P. Informàtica S.L
jordi@setupinformatica.com
tel: 93.881.42.48 fax:93.881.42.67