/system identity set name="VicCentreMesh" /system note set note="Aquesta configuracio es experimental i no esta suportada per l'aplicacio, recorda que si fas algun canvi, ho has de notificar a algun dels administradors" \ show-at-login=yes ## Creem el Pont on unirem mes tard les interficies. ## Activem el protocl RSTP /interface bridge add name="nuvol" \ protocol-mode=rstp \ comment="" \ disabled=no /snmp set contact="guifi@guifi.net" \ location="NuvolAusaCentre" \ enabled=yes /interface wireless set 0 antenna-gain=5 \ antenna-mode=ant-a \ band=5ghz \ country=spain \ dfs-mode=none \ frequency=5660 \ frequency-mode=manual-txpower \ hide-ssid=no \ mode=ap-bridge \ name="wlan1" \ radio-name="NuvolAusaVicCentre-Mesh" \ ssid="guifi.net-NuvolAusa5ghz" \ wds-default-bridge=nuvol \ wds-ignore-ssid=no \ wds-mode=dynamic-mesh \ disabled=no /interface bridge port add bridge=nuvol \ interface=ether1 \ comment="" \ disabled=no add bridge=nuvol \ interface=wlan1 \ comment="" \ disabled=no /ip address add address=10.155.100.1/23 \ broadcast=10.155.101.255 \ interface=nuvol \ network=10.155.100.0 \ comment="" \ disabled=no add address=172.25.10.205/30 \ broadcast=172.25.10.207 \ interface=ether2 \ network=172.25.10.204 \ comment="" \ disabled=no /ip dns set allow-remote-requests=yes \ primary-dns=10.138.160.98 \ secondary-dns=10.138.25.68 /system ntp client set mode=unicast \ primary-ntp=10.138.25.69 \ secondary-ntp=0.0.0.0 \ enabled=yes /tool bandwidth-server set enabled=yes \ authenticate=no \ allocate-udp-ports-from=2000 /tool graphing interface add /routing mme interface add disabled=no interface=nuvol passive=no primary=yes /routing mme network add disabled=no network=10.138.0.0/15 add disabled=no network=172.25.0.0/16 /routing ospf set distribute-default=never metric-bgp=20 metric-connected=20 \ metric-default=1 metric-rip=20 metric-static=20 redistribute-bgp=as-type-1 \ redistribute-connected=as-type-1 redistribute-rip=no \ redistribute-static=as-type-1 router-id=10.155.100.1 /routing ospf interface add authentication=none authentication-key="" cost=10 dead-interval=40s \ disabled=no hello-interval=10s interface=ether2 network-type=broadcast \ passive=no priority=1 retransmit-interval=5s transmit-delay=1s add authentication=none authentication-key="" cost=10 dead-interval=40s \ disabled=no hello-interval=10s interface=nuvol network-type=broadcast \ passive=no priority=1 retransmit-interval=5s transmit-delay=1s /routing ospf network add area=backbone disabled=no network=172.25.10.204/30 add area=backbone disabled=no network=10.155.100.0/23 /