# Generat per a:
# RouterOSv2.9
:log info "Unsolclic for 2798-SQBRepetidor2 going to be executed."
#
# Configuration for RouterOS > 2.9.50 or 3.4
# Trasto: 2798-SQBRepetidor2
#
# WARNING: Beta version
#
# Methods to upload/execute this script:
# 1.-As a script. Upload this output as a script either with:
# a.Winbox (with Linux, wine required)
# b.Terminal (telnet, ssh...)
# Then execute the script with:
# > /system script run script_name
# 2.-Imported file:
# Save this output to a file, then upload it to the router
# using ftp using a name like "script_name.rsc".
# (note that extension ".rsc" is required)
# Run the import file using the command:
# > /import script_name
# 3.-Telnet cut&paste:
# Open a terminal session, and cut&paste this output
# directly on the terminal input.
#
# Notes:
# -routing-test package is required, be sure you have it enabled at system packages
# -wlans should be enabled manually, be sure to set the correct antenna (a or b)
# according in how did you connect the cable to the miniPCI. Keep the
# power at the minimum possible and check the channel.
# -The script doesn't reset the router, you might have to do it manually
# -You must have write access to the router
# -MAC access (winbox, MAC telnet...) method is recommended
# (the script reconfigures some IP addresses, so communication can be lost)
# -No changes are done in user passwords on the device
# -A Read Only guest account with no password will be created to allow guest access
# to the router with no danger of damage but able to see the config.
# -Be sure that all packages are activated.
# -Don't run the script from telnet and being connected through an IP connection at
# the wLan/Lan interface: This interface will be destroyed during the script.
#
/ system identity set name=SQBRepetidor2
#
# DNS (client & server cache) zone: 2670
/ip dns set primary-dns=10.138.195.74 allow-remote-requests=yes
:delay 1
#
# NTP (client & server cache) zone: 2670
/system ntp client set enabled=yes mode=unicast primary-ntp=10.138.15.130
/system ntp server set manycast=no enabled=yes
:delay 1
#
# Bandwidth-server
/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
#
# SNMP
/snmp set contact="guifi@guifi.net" enabled=yes location="SQBRepetidorTV"
#
# Guest user
/user
:foreach i in [find group=read] do={/user remove $i;}
add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
#
# Graphing
/tool graphing interface add
# Remove current wLan/Lan bridge if exists
:foreach i in [/interface bridge find name=wLan/Lan] \
do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \
do={/interface bridge port remove $i; \
:foreach i in [/ip address find interface=wLan/Lan] \
do={/ip address remove $i;};};
/interface bridge remove $i;}
# Construct main bridge on wlan1 & ether1
/ interface bridge
add name="wLan/Lan"
/ interface bridge port
add interface=ether1 bridge=wLan/Lan
add interface=wlan1 bridge=wLan/Lan
:delay 1
#
# Radio#: 0 SQBAP3
/interface wireless set wlan1 name="wlan1" \
radio-name="SQBAP3" mode=ap-bridge ssid="guifi.net-SQBAP3" \
band="2.4ghz-b" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
frequency=2422 \
dfs-mode=none \
wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan1] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
#
:delay 1
# Type: wLan/Lan
/ip address
:foreach i in [find address="10.138.195.1/26"] do={remove $i}
/ ip address add address=10.138.195.1/26 network=10.138.195.0 broadcast=10.138.195.63 interface=wLan/Lan disabled=no
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
add interface=wLan/Lan
/ routing ospf network
:foreach i in [/routing ospf network find network=10.138.195.0/26] do={/routing ospf network remove $i;}
add network=10.138.195.0/26 area=backbone disabled=no
:delay 1
#
# DHCP
/ip dhcp-server lease
:foreach i in [find comment=""] do={remove $i;}
:delay 1
add address=10.138.195.2 mac-address=00:16:01:F2:0E:18 client-id=SQBAnnaiXeviRadio1 server=dhcp-wLan/Lan
add address=10.138.195.3 mac-address=00:1D:7E:4B:0E:E2 client-id=SQBjmdiazRadio1 server=dhcp-wLan/Lan
add address=10.138.195.4 mac-address=00:1C:10:14:14:BA client-id=BadoLoreRadio1 server=dhcp-wLan/Lan
add address=10.138.195.5 mac-address=00:1C:10:44:36:54 client-id=SQBMoratoRadio2 server=dhcp-wLan/Lan
add address=10.138.195.6 mac-address=00:1C:10:BF:69:0C client-id=SQBhenryhendersonRadio1 server=dhcp-wLan/Lan
add address=10.138.195.7 mac-address=00:16:01:B0:53:E5 client-id=SQBJosepSRadio1 server=dhcp-wLan/Lan
add address=10.138.195.8 mac-address=ff:ff:ff:ff:ff:ff client-id=SQBMerceGRadio1 server=dhcp-wLan/Lan
add address=10.138.195.9 mac-address=00:1D:7E:4B:65:B8 client-id=SQBAgustinMariRadio1 server=dhcp-wLan/Lan
add address=10.138.195.10 mac-address=ff:ff:ff:ff:ff:ff client-id=SQBVidra server=dhcp-wLan/Lan
add address=10.138.195.11 mac-address=00:16:01:F2:40:C6 client-id=SQBjcarreraRadio1 server=dhcp-wLan/Lan
add address=10.138.195.12 mac-address=00:1D:7E:4B:44:D2 client-id=sqbforteaRadio1 server=dhcp-wLan/Lan
add address=10.138.195.13 mac-address=00:16:01:B0:04:08 client-id=SQDBCanTon server=dhcp-wLan/Lan
add address=10.138.195.14 mac-address=00:16:01:4D:B5:82 client-id=SQBIMartinezRadio1 server=dhcp-wLan/Lan
add address=10.138.195.15 mac-address=ff:ff:ff:ff:ff:ff client-id=SQBagustibasaganyaRadio1 server=dhcp-wLan/Lan
add address=10.138.195.16 mac-address=00:1D:7E:BC:CC:61 client-id=SQBPlanaRadio1 server=dhcp-wLan/Lan
add address=10.138.195.17 mac-address=00:1D:7E:28:0B:5A client-id=CRISRMRadio1 server=dhcp-wLan/Lan
add address=10.138.195.18 mac-address=ff:ff:ff:ff:ff:ff client-id=SQBramonquerRadio1 server=dhcp-wLan/Lan
add address=10.138.195.19 mac-address=ff:ff:ff:ff:ff:ff client-id=SQBxavierbragulatRadio1 server=dhcp-wLan/Lan
add address=10.138.195.20 mac-address=ff:ff:ff:ff:ff:ff client-id=SQBJordiCRadio1 server=dhcp-wLan/Lan
add address=10.138.195.21 mac-address=00:1D:7E:F0:FE:9C client-id=SQBAOleaNauRadio1 server=dhcp-wLan/Lan
add address=10.138.195.22 mac-address=00:1D:7E:BC:C1:FC client-id=SQBAOleaRadio1 server=dhcp-wLan/Lan
add address=10.138.195.23 mac-address=00:1D:7E:E3:90:DC client-id=SQBJRoviraRadio1 server=dhcp-wLan/Lan
add address=10.138.195.24 mac-address=00:15:6D:A6:79:2B client-id=SQBPlanaNauRadio1 server=dhcp-wLan/Lan
add address=10.138.195.25 mac-address=ff:ff:ff:ff:ff:ff client-id=SQBTORadio2 server=dhcp-wLan/Lan
add address=10.138.195.26 mac-address=00:16:01:AF:FA:64 client-id=SQBDCastanyRadio1 server=dhcp-wLan/Lan
add address=10.138.195.27 mac-address=00:0B:6B:81:CE:43 client-id=SQBJoanMartaRadio1 server=dhcp-wLan/Lan
add address=10.138.195.28 mac-address=00:15:6D:A6:98:C8 client-id=SQBGimnasBisauraRadio1 server=dhcp-wLan/Lan
add address=10.138.195.29 mac-address=ff:ff:ff:ff:ff:ff client-id=SQBEspadalerRadio1 server=dhcp-wLan/Lan
add address=10.138.195.30 mac-address=00:16:01:B0:3E:78 client-id=SQBCSerratRadio1 server=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server network find address="10.138.195.0/26"] do={/ip dhcp-server network remove $i;}
:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
/ip pool add name=dhcp-wLan/Lan ranges=10.138.195.36-10.138.195.62
/ip dhcp-server network add address=10.138.195.0/26 gateway=10.138.195.1 domain=guifi.net comment=dhcp-wLan/Lan
:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
#
:delay 1
#
# Radio#: 1 RepetidorSQBMontesquiu
/interface wireless set wlan2 name="wlan2" \
radio-name="RepetidorSQBMontesquiu" mode=ap-bridge ssid="guifi.net-RepetidorSQBMontesquiu" \
band="5ghz" \
frequency-mode=manual-txpower country=spain antenna-gain=0 \
frequency=5680 \
dfs-mode=none \
wds-mode=static wds-default-bridge=none wds-default-cost=100 \
wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
:delay 1
# Type: wds/p2p
# Remove all existing wds interfaces
:foreach i in [/interface wireless wds find master-interface=wlan2] \
do={:foreach n in [/interface wireless wds get $i name] \
do={:foreach inum in [/ip address find interface=$n] \
do={/ip address remove $inum;};}; \
/interface wireless wds remove $i;}
/ interface wireless wds
add name="wds_MontesquiuCampanarST1" master-interface=wlan2 wds-address=00:0B:6B:4E:62:7D disabled=no
/ ip address add address=172.25.224.5/30 network=172.25.224.4 broadcast=172.25.224.7 interface=wds_MontesquiuCampanarST1 disabled=no comment="wds_MontesquiuCampanarST1"
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=wds_MontesquiuCampanarST1] do={/routing ospf interface remove $i;}
add interface=wds_MontesquiuCampanarST1
/ routing ospf network
:foreach i in [/routing ospf network find network=172.25.224.4/30] do={/routing ospf network remove $i;}
add network=172.25.224.4/30 area=backbone disabled=yes
/ routing bgp peer
:foreach i in [find name=MontesquiuCampanarST1] do={/routing bgp peer remove $i;}
add name="MontesquiuCampanarST1" instance=default remote-address=172.25.224.6 remote-as=5515 \
multihop=no route-reflect=no ttl=1 in-filter=ospf-in out-filter=ospf-out disabled=no
#
:delay 1
#
# Routed device
#
# Other cable connections
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=ether2] do={/routing ospf interface remove $i;}
add interface=ether2
/ routing ospf network
:foreach i in [/routing ospf network find network=172.25.226.0/30] do={/routing ospf network remove $i;}
add network=172.25.226.0/30 area=backbone disabled=no
/ routing bgp peer
:foreach i in [find name=SQBRepetidor] do={/routing bgp peer remove $i;}
add name="SQBRepetidor" instance=default remote-address=172.25.226.2 remote-as=2788 \
multihop=no route-reflect=no ttl=1 in-filter=ospf-in out-filter=ospf-out disabled=yes
:foreach i in [/ip address find address="172.25.226.1/30"] do={/ip address remove $i;}
:delay 1
/ ip address add address=172.25.226.1/30 network=172.25.226.0 broadcast=172.25.226.3 interface=ether2 disabled=no comment="SQBRepetidor"
/ routing ospf interface
:foreach i in [/routing ospf interface find interface=ether3] do={/routing ospf interface remove $i;}
add interface=ether3
/ routing ospf network
:foreach i in [/routing ospf network find network=172.25.224.8/30] do={/routing ospf network remove $i;}
add network=172.25.224.8/30 area=backbone disabled=no
/ routing bgp peer
:foreach i in [find name=SQBRepAjSQB] do={/routing bgp peer remove $i;}
add name="SQBRepAjSQB" instance=default remote-address=172.25.224.9 remote-as=2962 \
multihop=no route-reflect=no ttl=1 in-filter=ospf-in out-filter=ospf-out disabled=yes
:foreach i in [/ip address find address="172.25.224.10/30"] do={/ip address remove $i;}
:delay 1
/ ip address add address=172.25.224.10/30 network=172.25.224.8 broadcast=172.25.224.11 interface=ether3 disabled=no comment="SQBRepAjSQB"
#
# Internal addresses NAT
:foreach i in [/ip firewall nat find src-address="172.25.0.0/16"] do={/ip firewall nat remove $i;}
:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
/ip firewall nat
add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.138.195.1 to-ports=0-65535 comment="" disabled=no
add chain=srcnat src-address="172.25.0.0/16" dst-address=!172.25.0.0/16 protocol=!ospf action=src-nat to-addresses=10.138.195.1 to-ports=0-65535 comment="" disabled=no
#
# BGP Routing
# BGP & OSPF Filters
:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
/ routing filter
add chain=ospf-out prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-out invert-match=no action=discard comment="" disabled=no
add chain=ospf-in prefix=10.0.0.0/8 prefix-length=8-32 invert-match=no action=accept comment="" disabled=no
add chain=ospf-in invert-match=no action=reject comment="" disabled=no
#
# BGP instance
/ routing bgp instance
set default name="default" as=2798 router-id=10.138.195.1 redistribute-static=yes \
redistribute-connected=yes redistribute-rip=yes redistribute-ospf=yes \
redistribute-other-bgp=yes out-filter=ospf-out \
client-to-client-reflection=yes comment="" disabled=no
#
# OSPF Routing
/routing ospf set router-id=10.138.195.1 redistribute-connected=as-type-1 redistribute-static=as-type-1 redistribute-bgp=as-type-1
#
:log info "Unsolclic for 2798-SQBRepetidor2 executed."
/