# Generated for:
<br /># RouterOSv2.9
<br />:log info "Unsolclic for 6871-VicTMTRadio1 going to be executed."
<br /># 
<br /># Configuration for RouterOSv2.9
<br /># Device: 6871-VicTMTRadio1
<br /># 
<br /># Methods to upload/execute this script:
<br /># 1.-As a script. Upload this output as a script either with:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;a.Winbox (with Linux, wine required)
<br /># &nbsp;&nbsp;&nbsp;&nbsp;b.Terminal (telnet, ssh...)
<br /># &nbsp;&nbsp;&nbsp;Then execute the script with:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;>&nbsp;/system script run script_name
<br /># 2.-Imported file:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;Save this output to a file, then upload it to the router
<br /># &nbsp;&nbsp;&nbsp;&nbsp;using ftp using a name like "script_name.rsc".
<br /># &nbsp;&nbsp;&nbsp;&nbsp;(note that extension ".rsc" is required)
<br /># &nbsp;&nbsp;&nbsp;&nbsp;Run the import file using the command:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;>&nbsp;/import script_name
<br /># 3.-Telnet cut&paste:
<br /># &nbsp;&nbsp;&nbsp;&nbsp;Open a terminal session, and cut&paste this output
<br /># &nbsp;&nbsp;&nbsp;&nbsp;directly on the terminal input.
<br /># 
<br /># Notes:
<br /># -routing-test package is required if you use RouterOSv2.9 , be sure you have it enabled at system packages
<br /># -wlans should be enabled manually, be sure to set the correct antenna (a or b)
<br /># &nbsp;&nbsp;according in how did you connect the cable to the miniPCI. Keep the
<br /># &nbsp;&nbsp;power at the minimum possible and check the channel.
<br /># -The script doesn't reset the router, you might have to do it manually
<br /># -You must have write access to the router
<br /># -MAC access (winbox, MAC telnet...) method is recommended
<br /># &nbsp;&nbsp;(the script reconfigures some IP addresses, so communication can be lost)
<br /># -No changes are done in user passwords on the device
<br /># -A Read Only guest account with no password will be created to allow guest access
<br /># &nbsp;&nbsp;to the router with no danger of damage but able to see the config.
<br /># -Be sure that all packages are activated.
<br /># -Don't run the script from telnet and being connected through an IP connection at
<br /># &nbsp;&nbsp;the wLan/Lan interface: This interface will be destroyed during the script.
<br /># 
<br />/ system identity set name=VicTMTRadio1
<br /># 
<br /># DNS (client &#038; server cache) zone: 27556
<br />/ip dns set primary-dns=10.138.160.98 secondary-dns=10.138.0.2 allow-remote-requests=yes
<br />:delay 1
<br /># 
<br /># NTP (client &#038; server cache) zone: 27556
<br />/system ntp client set enabled=yes mode=unicast primary-ntp=10.138.160.98 secondary-ntp=10.138.0.2
<br />/system ntp server set manycast=no enabled=yes
<br />:delay 1
<br /># 
<br /># Bandwidth-server
<br />/ tool bandwidth-server set enabled=yes authenticate=no allocate-udp-ports-from=2000
<br /># 
<br /># SNMP
<br />/snmp set contact="guifi@guifi.net" enabled=yes location="VicTMT"
<br /># 
<br /># Guest user
<br />/user
<br />:foreach i in [find group=read] do={/user remove $i;}
<br />add name="guest" group=read address=0.0.0.0/0 comment="" disabled=no
<br /># 
<br /># Graphing
<br />/tool graphing interface add
<br /># Remove current wLan/Lan bridge if exists
<br />:foreach i in [/interface bridge find name=wLan/Lan] \ 
<br />do={:foreach i in [/interface bridge port find bridge=wLan/Lan] \ 
<br />do={/interface bridge port remove $i; \ 
<br />:foreach i in [/ip address find interface=wLan/Lan] \ 
<br />do={/ip address remove $i;};};
<br />/interface bridge remove $i;}
<br /># Construct main bridge on wlan1 &#038; ether1
<br />/ interface bridge
<br />add name="wLan/Lan"
<br />/ interface bridge port
<br />add interface=ether1 bridge=wLan/Lan
<br />add interface=wlan1 bridge=wLan/Lan
<br />:delay 1
<br /># 
<br /># Radio#: 0 VicTMTFactoryAP
<br />/interface wireless set wlan1 name="wlan1" \ 
<br />    radio-name="VicTMTFactoryAP" mode=ap-bridge ssid="guifi.net-VicTMTFactoryAP" \ 
<br />    band="2.4ghz-b"  \ 
<br />    frequency-mode=regulatory-domain country=spain antenna-gain=18 \ 
<br />    frequency=2412 \ 
<br />    dfs-mode=none \ 
<br />    wds-mode=static wds-default-bridge=none wds-default-cost=100 \ 
<br />    wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
<br />:delay 1
<br /># Type: wLan/Lan
<br />/ip address
<br />:foreach i in [find address="10.138.160.225/27"] do={remove $i}
<br />/ ip address add address=10.138.160.225/27 network=10.138.160.224 broadcast=10.138.160.255 interface=wLan/Lan disabled=no
<br />/ routing bgp network
<br />:foreach i in [/routing bgp network find network=10.138.160.224/27] do={/routing bgp network remove $i;}
<br />add network=10.138.160.224/27 disabled=no
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wLan/Lan] do={/routing ospf interface remove $i;}
<br />add interface=wLan/Lan
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=10.138.160.224/27] do={/routing ospf network remove $i;}
<br />add network=10.138.160.224/27 area=backbone disabled=no
<br />:delay 1
<br /># 
<br /># DHCP
<br />:foreach i in [/ip pool find name=dhcp-wLan/Lan] do={/ip pool remove $i;}
<br />/ip pool add name=dhcp-wLan/Lan ranges=10.138.160.231-10.138.160.254
<br />:foreach i in [/ip dhcp-server find name=dhcp-wLan/Lan] do={/ip dhcp-server remove $i;}
<br />/ip dhcp-server add name=dhcp-wLan/Lan interface=wLan/Lan address-pool=dhcp-wLan/Lan disabled=no
<br />:foreach i in [/ip dhcp-server network find address="10.138.160.224/27"] do={/ip dhcp-server network remove $i;}
<br />/ip dhcp-server network add address=10.138.160.224/27 gateway=10.138.160.225 domain=guifi.net comment=dhcp-wLan/Lan
<br />/ip dhcp-server lease
<br />:foreach i in [find comment=""] do={remove $i;}
<br />:delay 1
<br />add address=10.138.160.226 mac-address=44:44:44:44:44:46 client-id=VicAtari server=dhcp-wLan/Lan
<br />add address=10.138.160.227 mac-address=00:16:01:F2:11:9B client-id=VicVilardagaRadio1 server=dhcp-wLan/Lan
<br />add address=10.138.160.228 mac-address=ff:ff:ff:ff:ff:ff client-id=VicMRieraRadio1 server=dhcp-wLan/Lan
<br />add address=10.138.160.229 mac-address=00:15:6D:A7:AB:7D client-id=Casapol1Rd1 server=dhcp-wLan/Lan
<br />add address=10.138.160.230 mac-address=00:1D:0F:AE:8C:61 client-id=VicSallesRadio1 server=dhcp-wLan/Lan
<br />add address=10.138.160.231 mac-address=00:15:6D:1A:07:F2 client-id=VicXCornellaRd1 server=dhcp-wLan/Lan
<br />add address=10.138.160.232 mac-address=00:15:6D:AD:16:26 client-id=VicJSolaRd1 server=dhcp-wLan/Lan
<br />add address=10.138.160.233 mac-address=00:1D:0F:B1:74:95 client-id=VicRblaCarmeRadio1 server=dhcp-wLan/Lan
<br />add address=10.138.160.234 mac-address=00:15:6D:AD:D8:AA client-id=VicEraSellesRd2 server=dhcp-wLan/Lan
<br />add address=10.138.160.235 mac-address=00:15:6D:AE:E3:51 client-id=VicGabarrosRd1 server=dhcp-wLan/Lan
<br />add address=10.138.160.236 mac-address=00:15:6D:DB:A2:92 client-id=VicIsabelP server=dhcp-wLan/Lan
<br />add address=10.138.160.237 mac-address=00:16:01:8C:70:0B client-id=VicAngelRRRd2 server=dhcp-wLan/Lan
<br />add address=10.138.160.238 mac-address=00:15:58:56:12:79 client-id=VicMSaladoRd2 server=dhcp-wLan/Lan
<br />add address=10.138.160.239 mac-address=00:15:6D:D3:E1:8C client-id=VICNord1Rd1 server=dhcp-wLan/Lan
<br />add address=10.138.160.240 mac-address=00:15:6D:AD:D8:AA client-id=VicCtraGurb1Rd1 server=dhcp-wLan/Lan
<br />add address=10.138.160.241 mac-address=00:15:6D:EC:B0:89 client-id=VicPFontRd1 server=dhcp-wLan/Lan
<br />add address=10.138.160.242 mac-address=00:16:01:F2:2C:E3 client-id=VicBertaSRd1 server=dhcp-wLan/Lan
<br />add address=10.138.160.243 mac-address=00:14:BF:77:74:91 client-id=VicCarquinyoli server=dhcp-wLan/Lan
<br />add address=10.138.160.244 mac-address=00:15:6D:5E:88:14 client-id=VicCanQuesRd1 server=dhcp-wLan/Lan
<br />add address=10.138.160.245 mac-address=23:45:08:76:5D:E6 client-id=VicMareliaRd2 server=dhcp-wLan/Lan
<br />add address=10.138.160.246 mac-address=00:15:6D:5F:B9:64 client-id=VicFCamprodon43Rd1 server=dhcp-wLan/Lan
<br />add address=10.138.160.247 mac-address=00:16:01:8E:DE:8D client-id=VicRondaRadio1 server=dhcp-wLan/Lan
<br /># 
<br />:delay 1
<br /># Type: wds/p2p
<br /># Remove all existing wds interfaces
<br />:foreach i in [/interface wireless wds find master-interface=wlan1] \ 
<br />do={:foreach n in [/interface wireless wds get $i name] \ 
<br />do={:foreach inum in [/ip address find interface=$n] \ 
<br />do={/ip address remove $inum;};}; \ 
<br />/interface wireless wds remove $i;}
<br /># 
<br />:delay 1
<br /># 
<br /># Radio#: 1 VicTMT-Habitat-5Ghz
<br />/interface wireless set wlan2 name="wlan2" \ 
<br />    radio-name="VicTMT-Habitat-5Ghz" mode=ap-bridge ssid="guifi.net-VicTMT-Habitat-5Ghz" \ 
<br />    band="5ghz"  \ 
<br />    frequency-mode=regulatory-domain country=spain antenna-gain=21 \ 
<br />    frequency=5200 \ 
<br />    dfs-mode=none \ 
<br />    wds-mode=static wds-default-bridge=none wds-default-cost=100 \ 
<br />    wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
<br />:delay 1
<br /># Type: wds/p2p
<br /># Remove all existing wds interfaces
<br />:foreach i in [/interface wireless wds find master-interface=wlan2] \ 
<br />do={:foreach n in [/interface wireless wds get $i name] \ 
<br />do={:foreach inum in [/ip address find interface=$n] \ 
<br />do={/ip address remove $inum;};}; \ 
<br />/interface wireless wds remove $i;}
<br />/ interface wireless wds
<br />add name="wds_VicHabitatST2" master-interface=wlan2 wds-address=00:0C:42:64:0E:8D disabled=no
<br />/ ip address add address=172.25.10.157/30 network=172.25.10.156 broadcast=172.25.10.159 interface=wds_VicHabitatST2 disabled=no comment="wds_VicHabitatST2"
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wds_VicHabitatST2] do={/routing ospf interface remove $i;}
<br />add interface=wds_VicHabitatST2
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=172.25.10.156/30] do={/routing ospf network remove $i;}
<br />add network=172.25.10.156/30 area=backbone disabled=no
<br />/ routing bgp peer
<br />:foreach i in [find name=VicHabitatST2] do={/routing bgp peer remove $i;}
<br />add name="VicHabitatST2" instance=default remote-address=172.25.10.158 remote-as=2557 \ 
<br />multihop=no route-reflect=no ttl=default in-filter=ebgp-in out-filter=ebgp-out disabled=yes
<br /># 
<br />:delay 1
<br /># 
<br /># Radio#: 2 VicTMT-VicGirbau
<br />/interface wireless set wlan3 name="wlan3" \ 
<br />    radio-name="VicTMT-VicGirbau" mode=ap-bridge ssid="guifi.net-VicTMT-VicGirbau" \ 
<br />    band="5ghz"  \ 
<br />    frequency-mode=regulatory-domain country=spain antenna-gain=8 \ 
<br />    frequency=5600 \ 
<br />    dfs-mode=none \ 
<br />    antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \ 
<br />    wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
<br />:delay 1
<br /># Type: wds/p2p
<br /># Remove all existing wds interfaces
<br />:foreach i in [/interface wireless wds find master-interface=wlan3] \ 
<br />do={:foreach n in [/interface wireless wds get $i name] \ 
<br />do={:foreach inum in [/ip address find interface=$n] \ 
<br />do={/ip address remove $inum;};}; \ 
<br />/interface wireless wds remove $i;}
<br />/ interface wireless wds
<br />add name="wds_VicGirbauSTRadio1" master-interface=wlan3 wds-address=00:0C:42:18:80:72 disabled=no
<br />/ ip address add address=172.25.10.5/30 network=172.25.10.4 broadcast=172.25.10.7 interface=wds_VicGirbauSTRadio1 disabled=no comment="wds_VicGirbauSTRadio1"
<br />/ routing ospf interface
<br />:foreach i in [/routing ospf interface find interface=wds_VicGirbauSTRadio1] do={/routing ospf interface remove $i;}
<br />add interface=wds_VicGirbauSTRadio1
<br />/ routing ospf network
<br />:foreach i in [/routing ospf network find network=172.25.10.4/30] do={/routing ospf network remove $i;}
<br />add network=172.25.10.4/30 area=backbone disabled=no
<br />/ routing bgp peer
<br />:foreach i in [find name=VicGirbauSTRadio1] do={/routing bgp peer remove $i;}
<br />add name="VicGirbauSTRadio1" instance=default remote-address=172.25.10.6 remote-as=5428 \ 
<br />multihop=no route-reflect=no ttl=default in-filter=ebgp-in out-filter=ebgp-out disabled=yes
<br /># 
<br />:delay 1
<br /># 
<br /># Radio#: 3 VicTMT-EraSelles
<br />/interface wireless set wlan4 name="wlan4" \ 
<br />    radio-name="VicTMT-EraSelles" mode=ap-bridge ssid="guifi.net-VicTMT-EraSelles" \ 
<br />    band="5ghz"  \ 
<br />    frequency-mode=regulatory-domain country=spain antenna-gain=14 \ 
<br />    frequency=5680 \ 
<br />    dfs-mode=none \ 
<br />    antenna-mode=ant-a wds-mode=static wds-default-bridge=none wds-default-cost=100 \ 
<br />    wds-cost-range=50-150 wds-ignore-ssid=yes hide-ssid=no
<br />:delay 1
<br /># Type: wds/p2p
<br /># Remove all existing wds interfaces
<br />:foreach i in [/interface wireless wds find master-interface=wlan4] \ 
<br />do={:foreach n in [/interface wireless wds get $i name] \ 
<br />do={:foreach inum in [/ip address find interface=$n] \ 
<br />do={/ip address remove $inum;};}; \ 
<br />/interface wireless wds remove $i;}
<br /># 
<br />:delay 1
<br /># 
<br /># Routed device
<br /># 
<br /># Other cable connections
<br /># 
<br /># Internal addresses NAT
<br />:foreach i in [/ip firewall nat find src-address="172.16.0.0/12"] do={/ip firewall nat remove $i;}
<br />:foreach i in [/ip firewall nat find src-address="192.168.0.0/16"] do={/ip firewall nat remove $i;}
<br />/ip firewall nat
<br />add chain=srcnat src-address="192.168.0.0/16" dst-address=!192.168.0.0/16 action=src-nat to-addresses=10.138.160.225 to-ports=0-65535 comment="" disabled=no
<br />add chain=srcnat src-address="172.16.0.0/12" dst-address=!172.16.0.0/12 protocol=!ospf action=src-nat to-addresses=10.138.160.225 to-ports=0-65535 comment="" disabled=no
<br /># 
<br /># BGP Routing
<br /># BGP & OSPF Filters
<br />:foreach i in [/routing filter find chain=ospf-in] do={/routing filter remove $i;}
<br />:foreach i in [/routing filter find chain=ospf-out] do={/routing filter remove $i;}
<br />:foreach i in [/routing filter find chain=ebgp-in] do={/routing filter remove $i;}
<br />:foreach i in [/routing filter find chain=ebgp-out] do={/routing filter remove $i;}
<br />/ routing filter
<br />add action=discard chain=ebgp-in comment="1. Discard insert non 10.x routes from BGP peer" disabled=no invert-match=no prefix=!10.0.0.0/8 prefix-length=!8-32
<br />add action=discard chain=ebgp-out comment="2. Discard send non 10.x routes to BGP peer" disabled=no invert-match=no prefix=!10.0.0.0/8 prefix-length=!8-32
<br />add action=accept chain=ospf-in comment="3. Accept insert 10.x routes from OSPF neighbor" disabled=no invert-match=no prefix=10.0.0.0/8 prefix-length=8-32
<br />add action=accept chain=ospf-in comment="4. Accept insert 172.x routes from OSPF neighbor" disabled=no invert-match=no prefix=172.16.0.0/12 prefix-length=8-32
<br />add action=discard chain=ospf-in comment="5. Discard insert non 10.x and 172.x from OSPF neighbor" disabled=no invert-match=no
<br />add action=accept chain=ospf-out comment="6. Allow send 10.x routes to OSPF neighbor" disabled=no invert-match=no prefix=10.0.0.0/8 prefix-length=8-32
<br />add action=accept chain=ospf-out comment="7. Allow send 172.x routes to OSPF neighbor" disabled=no invert-match=no prefix=172.16.0.0/12 prefix-length=8-32
<br />add action=discard chain=ospf-out comment="8. Discard send non 10.x and 172.x to OSPF neighbor" disabled=no invert-match=no
<br /># 
<br /># BGP instance
<br />/ routing bgp instance
<br />set default name="default" as=6871 router-id=10.138.160.225 \ 
<br />redistribute-connected=yes redistribute-static=yes redistribute-rip=yes \ 
<br />redistribute-ospf=yes redistribute-other-bgp=yes out-filter=ebgp-out \ 
<br />client-to-client-reflection=yes comment="" disabled=no
<br /># 
<br /># OSPF Routing
<br />/routing ospf set router-id=10.138.160.225 distribute-default=never redistribute-connected=no \ 
<br />redistribute-static=no redistribute-rip=no redistribute-bgp=as-type-1
<br /># 
<br />:log info "Unsolclic for 6871-VicTMTRadio1 executed."
<br />/
<br />